C80 series cable mounted

8 kV Coupler

C80 cable mounted

Design: cable mounted coupler (plug & receptacle)
Contact assignment: 3 phase, 1 ground, 1 pilot => 250 A
3 phase, 2 ground, 1 pilot => 400 A & 500 A
Rated voltage: 8 kV 3 AC
Rated withstand voltage: 26 kV (1 min) dry
Rated current: 250 A, 400 A, 500 A
Short circuit current: 38 kA RMS
Frequency: 50 – 60 Hz
Protection class: IP 67H
Ambient temperature: -40 °C to +45 °C
Shock resistance: IK 10
Sealing: EPDM, potting compound not required
Cable cross section / ø: max. 120 mm² / 21 – 89 mm
Material: sea water resistant aluminum
Surface treatment: nature, polyester powder coating
Dimensions P / R (L x H): 533 x 241 mm / 584 x 241 mm
Weight Plug / Receptacle: 14,5 kg / 15,3 kg

New IMG Coupler Series

  • OPTIONAL on request
  • Fiber optic components have been developed to meet military specifications and requirements
  • Three times the crush resistance and twice the tensile strength of non-metallic fiber optic cables
  • Communication is not impacted even if rolled over by a tank
  • Totally rodent proof
  • Pollution resistance – designed for connection and disconnection on site
  • High performance 2,5 mm termini and a split ceramic alignment sleeve assures superior performance and low optical insertion loss even under high shock and vibration
  • Aluminum enclosure with durable anodization
  • Stainless steel version on request
  • APC terminals on request
  • Single mode and multi mode operation possible
  • Configurable design supports from 2 -18 fiber channels per connector
  • Environmental sealing to IP68
Product: Live current insulated cover
Features: Possibility of applying a voltage to the connector even when not plugged in
Design: Male design for C80D1-series
Female design for C80D2-series
Rated voltage Male / Female Pluggable with Patton & Cooke
250 A M C80C1000x 11E-073
F C80C2000x 11E-073A
400 A M C80D1000x C80D3008
F C80D2000x C80D3009
Product: short circuit cover
Features:
  • for shorting and grounding
  • avoidance of capacitive loads
  • in the cable and connectors
Design: plug design for C80D1-series
receptacle Design for C80D2-series
Usage: for C80D-series (400 A)
  • The strain relief entrance fittings are included with the coupler C80 series.
  • The entrance fitting gasket kits are normally not included with the C80 coupler series. For Europe, there are exceptions, so this point must be requested on a case by case basis.
  • The termination kits must be ordered separately with the C80 coupler series.
  • For the C80 coupler series is potting compound not required. A save operation is guaranteed. If the couper has to be used for a very long time (>5 years) or in hazardous applications whith the possibility of the formation of moisture then the use of potting compound is recommended.

The termination kit for preparing the conductors consists of: emery paper, shrink tubing, adhesive strap, copper contact tape, contact spring, resin for pressure relief and solvent as well as cleaning cloths.

Sketch Outer cable diameter Article number
(mm) (in)
21 – 47 0.820 – 1.870 C150F3029
48 – 60 1.880 – 2.370 C150F3030
61 – 69 2.380 – 2.750 C150F3031
70 – 89 2.760 – 3.500 C150F3032
Suitable for C80, C150, CEM 150 and C250 connector and coupler series
Cable diameter Article number
(mm) (in)
20,8 – 22,1 0.82 – 0.87 C150F3004
22,4 – 23,9 0.88 – 0.94 C150F3005
24,1 – 25,7 0.95 – 1.01 C150F3006
25,9 – 26,9 1.02 – 1.06 C150F3007
27,2 – 28,4 1.07 – 1.12 C150F3008
28,7 – 31,8 1.13 – 1.25 C150F3009
32,0 – 34,8 1.26 – 1.37 C150F3010
35,0 – 38,1 1.38 – 1.50 C150F3011
38,4 – 41,1 1.51 – 1.62 C150F3012
41,4 – 44,5 1.63 – 1.75 C150F3013
44,7 – 47,5 1.76 – 1.87 C150F3014
47,8 – 50,8 1.88 – 2.00 C150F3015
Cable diameter Article number
(mm) (in)
51,1 – 53.8 2.01 – 2.12 C150F3016
54,1 – 57,2 2.13 – 2.25 C150F3017
57,4 – 60,2 2.26 – 2.37 C150F3018
60,5 – 63,5 2.38 – 2.50 C150F3019
63,8 – 66,5 2.51 – 2.62 C150F3020
66,8 – 69,9 2.63 – 2.75 C150F3021
70,1 – 72,9 2.76 – 2.87 C150F3022
73,2 – 76,2 2.88 – 3.00 C150F3023
76,5 – 79,2 3.01 – 3.12 C150F3024
79,5 – 82,6 3.13 – 3.25 C150F3025
82,8 – 85,6 3.26 – 3.37 C150F3026
85,9 – 88,9 3.38 – 3.50 C150F3027
Suitable for C80, C150, CEM150 and C250 coupler series
Pay attention: The sealing inserts normally must be ordered separately!

Data Sheets