C10 flange mounted
1,1 kV Coupler
C10 flange mounted
| Design: | flange mounted coupler (plug & receptacle) |
| Contact assignment: | 3 phase, 1 ground, 1 pilot contact |
| Rated voltage: | 600 V / 1 kV 3 AC |
| Rated withstand voltage: | 2 kV (1min) dry |
| Rated current: | 145 A, 160 A, 225 A, 325 A |
| Frequency: | 50 – 60 Hz |
| Protection class: | IP 65 |
| Ambient temperature: | -25 °C to +45 °C |
| Shock resistance: | IK 10 |
| Sealing: | EPDM |
| Cable cross section: | max. 25 mm² |
| Material: | sea water resistant aluminum |
| Surface treatment: | nature, polyester powder coating |
| Dimensions P / R (L x ø): | 203 x 70 mm / 152 x 70 mm (for C10D) |
| Weight Plug / Receptacle: | 7,26 kg / 6,81 kg (for C10D) |
Further Inormation For C10 Series
- The strain relief entrance fittings are included with the C10 coupler series.
- The entrance fitting gasket kits are normally not included with the C10 coupler series. For Europe, there are exceptions, so this point must be requested on a case by case basis.
- There is no termination kit required for the C10 coupler series.
