C250 cable mounted
25 kV Coupler
C250 cable mounted
| Design: | cable mounted coupler (as plug) |
| Contact assignment: | 3 phase, 1 ground, 1 pilot |
| Rated voltage: | 25 kV 3 AC |
| Rated withstand voltage: | 50 kV (1 min) dry |
| Rated current: | 650 A |
| Short circuit current: | 25 kA RMS (0,2 s) |
| Frequency: | 50 – 60 Hz |
| Protection class: | IP 67H |
| Ambient temperature: | -40 °C to +45 °C |
| Shock resistance: | IK 10 |
| Sealing: | EPDM, potting compound not required |
| Cable cross section / ø: | max. 240 mm² / 21 – 89 mm |
| Material: | heat treated, sea water resistant aluminum |
| Surface treatment: | epoxy-powder coating |
| Dimensions Receptacle (L x H): | 686 x 251 mm |
| Weight Receptacle: | 25,5 kg |
| USP: | electric strength without using potting compound |
C-Coupler-Series
- The strain relief entrance fittings are included with the coupler C250.
- The entrance fitting gasket kits are not included with the C250 coupler series. It has to be ordered separately.
- No termination kits are required for the C250 coupler.
- For the C250 coupler series no potting compound is required but possible as an additional sealing against the formation of moisture.
