IMG 25000V flange mounted
25 kV Coupler
IMG 25000V flange mounted
| Design: | flange mounted coupler |
| Article: | EMM25500 (plug) & EMF25500 (receptacle) |
| Contact assignment: | 3 phase, 2 ground, 1 pilot contact |
| Rated voltage: | 25 kV 3 AC |
| AC voltage withstand: | 54 kV dry (5 min) |
| Lightning impulse withstand voltage: | 125 kV (10 pos,10 neg) |
| Rated current: | 500 A |
| Frequency: | 50 – 60 Hz |
| Protection class: | IP 67H |
| Ambient temperature: | -40 °C to +45 °C |
| Sealing: | EPDM, potting compound (not required) |
| Cable cross section: | 35 – 120 mm² |
| Material: | bare aluminum alloy A365.2 |
| Contacts: | silver-plated copper / brass |
| Surface treatment: | nature, durable epoxy powder coating |
| Dimensions P / R (L x ø): | 238 x 312 mm / 299 x 312 mm |
| Weight Plug / Receptacle: | 15,96 kg / 15,46 kg |
| Tested: | in accordance to CSA 22.2 #298 |
New IMG Coupler Series
- UL listed material
- High electric strength
- High durability, high heat resistance and high dielectric strength
- Guarantees protection class IP 67
- High strain-relief and bending protection
- Reusable again
- Provides air-free termination
- Ensures a secure contact and connection between wires and
pin/socket contacts
- Tapered pins
- Ensure a secure and lasting connection between male and female contacts
- Prevent phase to phase faults and partial discharges
- Ensure proper high ground fault current conductivity
- Installation of a “Kirk” key locking system for protection against unintentional opening
- Enables an access with key
- Side handles enables handling with the connectors
- Mounting feet allow the fixing of a connector
- Different colors available (customized)
- CS = cable mounted coupler, EM = equipment mounted coupler, JB = coupler mounted to junction box
- CL = cable mounted coupler with leg mount, CH = cable mounted coupler with handle
